MC8×22.8 Channel Dimensions & Properties

C & MC Channels (AISC) · MC shapes: miscellaneous channels

MC8×22.8 is an AISC MC shapes: miscellaneous channels channel. It is 8 in (203.2 mm) deep with a 3.5 in (88.9 mm) flange, a 0.427 in (10.8 mm) web and an average flange thickness of 0.525 in (13.3 mm), and weighs 22.8 lb/ft (33.9 kg/m). Area 6.7 in² (4,323 mm²); centroid 1.01 in (25.7 mm) from the back of the web; Ix = 63.8 in⁴ (2,655.6 cm⁴), Sx = 15.9 in³ (260.6 cm³).

dDepth
203.2 mm8 in8 in203.2 mm
bfFlange width
88.9 mm3.5 in3.5 in88.9 mm
twWeb thickness
10.8 mm0.427 in0.427 in10.8 mm
tfFlange thickness (average)
13.3 mm0.525 in0.525 in13.3 mm

Drawing

88.9 mm3.5 in203.2 mm8 intf 13.3 mmtf 0.525 intw 10.8 mmtw 0.427 ine 25.7 mme 1.01 in
Flanges drawn parallel; MC flange slopes vary by shape.Drawn to scale · Dimensions in mmDimensions in inches

MC8×22.8 specifications

dDepth8 in203.2 mm
bfFlange width3.5 in88.9 mm
twWeb thickness0.427 in10.8 mm
tfFlange thickness (average)0.525 in13.3 mm
kDesign value1.19 in30.2 mm
kDetailing value1 3/16 in30.2 mm
WWeight22.8 lb/ft33.9 kg/m
AArea6.7 in²4,323 mm²
x̄Centroid from back of web1.01 in25.7 mm
eoShear centre from web1.04 in26.4 mm
IxMoment of inertia, strong axis63.8 in⁴2,655.6 cm⁴
ZxPlastic modulus, strong axis19.1 in³313 cm³
SxSection modulus, strong axis15.9 in³260.6 cm³
rxRadius of gyration, strong axis3.09 in78.5 mm
IyMoment of inertia, weak axis7.01 in⁴291.8 cm⁴
ZyPlastic modulus, weak axis5.37 in³88 cm³
SySection modulus, weak axis2.81 in³46 cm³
ryRadius of gyration, weak axis1.02 in25.9 mm
JTorsional constant0.572 in⁴23.81 cm⁴
Metric designationMC200×33.9

Also known as

MC200×33.9

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.