1/2" NPT Cable Gland Thread & Hole Size

Cable Glands · NPT conduit entries (ASME B1.20.1)

A 1/2" NPT cable gland has a 0.840 in (21.34 mm) entry thread with 14.0 TPI (1.814 mm) pitch. The table below gives the clearance hole for a gland held by a locknut and the tap drill for a threaded entry.

dThread outside diameter
21.34 mm0.840 in0.840 in21.34 mm
PThread pitch
1.814 mm14.0 TPI14.0 TPI1.814 mm
⌀Clearance hole
22.5 mm0.885 in0.885 in22.5 mm

Drawing

⌀21.34 mm⌀0.840 inpitch 1.814 mm14.0 TPIhole ⌀22.5 mmhole ⌀0.885 inenclosure wall
Gland with locknut through an enclosure wall. Thread and hole proportional; body and cap nut shape typical.Proportions shown, not to scale · Dimensions in mmDimensions in inches

1/2" NPT specifications

dThread outside diameter21.34 mm0.840 in
PThread pitch1.814 mm14.0 TPI
⌀Clearance hole22.5 mm0.885 in
Tap drill (threaded entry)18.26 mm0.719 in

1/2" NPT has a 0.840" (21.3 mm) diameter at the gauge plane and 14 threads per inch. Through-panel mounting uses the standard 1/2" conduit knockout, which a Greenlee 1/2" conduit punch makes at 0.885" (22.5 mm), nominally 7/8".

Thread dimensions

All Cable Glands sizes

Compare all 24 thread sizes in the Cable Glands chart →

Sources

  1. DIN 40430: Steel conduit thread (PG): dimensions, via gewindebohrer.de thread tables
  2. Heyco: PG hub liquid-tight cordgrip, DIN 40430 thread specifications
  3. Newman Tools: PG steel conduit taps per DIN 40430 (tap drill sizes)
  4. LAPP: SKINTOP ST-M cable glands, metric (clamping ranges)
  5. metric-bolt-torque.com: Cable gland sizes and entry holes
  6. Greenlee: Standard round knockout punches (hole sizes per conduit trade size)
  7. ASME B1.20.1: Pipe threads, general purpose (inch), NPT

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.