3/4" NPT Cable Gland Thread & Hole Size
Cable Glands · NPT conduit entries (ASME B1.20.1)
A 3/4" NPT cable gland has a 1.050 in (26.67 mm) entry thread with 14.0 TPI (1.814 mm) pitch. The table below gives the clearance hole for a gland held by a locknut and the tap drill for a threaded entry.
- dThread outside diameter
- 26.67 mm1.050 in1.050 in26.67 mm
- PThread pitch
- 1.814 mm14.0 TPI14.0 TPI1.814 mm
- ⌀Clearance hole
- 28.3 mm1.115 in1.115 in28.3 mm
Drawing
3/4" NPT specifications
| dThread outside diameter | 26.67 mm1.050 in |
|---|---|
| PThread pitch | 1.814 mm14.0 TPI |
| ⌀Clearance hole | 28.3 mm1.115 in |
| Tap drill (threaded entry) | 23.42 mm0.922 in |
Thread dimensions
All Cable Glands sizes
Sources
- DIN 40430: Steel conduit thread (PG): dimensions, via gewindebohrer.de thread tables
- Heyco: PG hub liquid-tight cordgrip, DIN 40430 thread specifications
- Newman Tools: PG steel conduit taps per DIN 40430 (tap drill sizes)
- LAPP: SKINTOP ST-M cable glands, metric (clamping ranges)
- metric-bolt-torque.com: Cable gland sizes and entry holes
- Greenlee: Standard round knockout punches (hole sizes per conduit trade size)
- ASME B1.20.1: Pipe threads, general purpose (inch), NPT
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.