1" NPT Cable Gland Thread & Hole Size
Cable Glands · NPT conduit entries (ASME B1.20.1)
A 1" NPT cable gland has a 1.315 in (33.4 mm) entry thread with 11.5 TPI (2.209 mm) pitch. The table below gives the clearance hole for a gland held by a locknut and the tap drill for a threaded entry.
- dThread outside diameter
- 33.4 mm1.315 in1.315 in33.4 mm
- PThread pitch
- 2.209 mm11.5 TPI11.5 TPI2.209 mm
- ⌀Clearance hole
- 34.6 mm1.362 in1.362 in34.6 mm
Drawing
1" NPT specifications
| dThread outside diameter | 33.4 mm1.315 in |
|---|---|
| PThread pitch | 2.209 mm11.5 TPI |
| ⌀Clearance hole | 34.6 mm1.362 in |
| Tap drill (threaded entry) | 29.37 mm1.156 in |
Thread dimensions
All Cable Glands sizes
Sources
- DIN 40430: Steel conduit thread (PG): dimensions, via gewindebohrer.de thread tables
- Heyco: PG hub liquid-tight cordgrip, DIN 40430 thread specifications
- Newman Tools: PG steel conduit taps per DIN 40430 (tap drill sizes)
- LAPP: SKINTOP ST-M cable glands, metric (clamping ranges)
- metric-bolt-torque.com: Cable gland sizes and entry holes
- Greenlee: Standard round knockout punches (hole sizes per conduit trade size)
- ASME B1.20.1: Pipe threads, general purpose (inch), NPT
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.