1-11.5 NPT Thread Dimensions

Pipe Threads · NPT: American taper pipe thread, ASME B1.20.1

1-11.5 NPT (NPT: American taper pipe thread, ASME B1.20.1) has 11.5 TPI (2.209 mm) and an outside diameter of about 33.401 mm (1.315 in). Thread form: Tapered 1:16 on diameter, 60° flank angle. Engagement length 10.2 mm (0.400 in).

nThreads per inch
2.209 mm11.5 TPI11.5 TPI2.209 mm
DOutside diameter (pipe OD / major Ø)
33.401 mm1.315 in1.315 in33.401 mm
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)
10.2 mm0.400 in0.400 in10.2 mm
Tap drill (typical)
1-5/32 in (29.4 mm)

Drawing

gauge planeL₁ 10.2 mmL₁ 0.400 in⌀33.401 mm⌀1.315 inTaper 1:16 on diameter (exaggerated)
60°P = 2.209 mmP = 11.5 TPIFlat crests and roots (NPT)
NPT: 60° thread on a 1:16 taper. L₁ is the hand-tight engagement from the small end to the gauge plane.Proportions shown, not to scale · Dimensions in mmDimensions in inches

1-11.5 NPT specifications

nThreads per inch11.5 TPI2.209 mm
DOutside diameter (pipe OD / major Ø)33.401 mm1.315 in
L₁Engagement length (NPT L1 hand-tight / ISO 7 gauge length)10.2 mm0.400 in
L₂Effective thread length (L2)17.3 mm0.6828 in
Tap drill (typical)1-5/32 in (29.4 mm)
Thread angle60°
FormTapered 1:16 on diameter

1-11.5 NPT: the 11.5 TPI pitch is shared by all NPT sizes from 1 to 2 inch.

BSP thread of the same nominal size (not interchangeable)

Pipe this thread is cut on

All Pipe Threads sizes

Compare all 28 sizes in the Pipe Threads chart →

Sources

  1. ASME B1.20.1: Pipe Threads, General Purpose, Inch
  2. ISO 228-1:2000, Pipe threads where pressure-tight joints are not made on the threads
  3. ISO 7-1:1994, Pipe threads where pressure-tight joints are made on the threads
  4. Engineers Edge: Whitworth pipe thread (DIN ISO 228) tap drill table
  5. Machining Doctor: NPT thread charts (B1.20.1 basic dimensions)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.