MC Cable Wire and Cable Specifications
US Cable Types · Cable assemblies
MC Cable: Metal-Clad cable (interlocked aluminum or steel armor). Voltage rating 600 V. Conductor insulation rated up to 90°C (194°F). Listed for dry, damp locations. Covered by NEC Article 330; typical sizes 14 AWG – 1000 kcmil.
- Voltage rating
- 600 V
- Max. conductor temp.
- 90°C194°F194°F90°C
- NEC article
- 330
Drawing
MC Cable specifications
| Meaning of the letters | Metal-Clad cable (interlocked aluminum or steel armor) |
|---|---|
| Voltage rating | 600 V |
| Max. conductor temp. | 90°C194°F |
| Locations | dry, damp |
| Conductor insulation | PVC + nylon |
| Jacket / armor | metal armor |
| NEC article | 330 |
| Sizes | 14 AWG – 1000 kcmil |
MC cable has an interlocking metal armor over THHN conductors and a separate insulated green grounding conductor. MC-AP (aluminum armor with a bare aluminum bonding wire) lets the armor serve as the equipment ground. Used where codes or specifications exclude NM cable (commercial buildings, exposed runs).
Other types in this group
All US Cable Types sizes
Sources
- NFPA 70, National Electrical Code (2023): Table 310.4(1); Articles 320, 330, 334, 336, 338, 340, 400, 402, 690
- Southwire: Romex SIMpull Type NM-B, spec 10028 (600 V, 90 °C conductors, 60 °C ampacity, jacket colour code)
- Southwire: Copper Service Entrance SER / SEU cable (XHHW-2, 90 °C wet or dry, grey PVC jacket)
- Southwire: RHH/RHW-2/USE-2 copper, spec 10010 (600 V, 90 °C wet or dry)
- UL 83 (thermoplastic insulated wires), UL 44 (thermoset), UL 719 (NM), UL 1569 (MC), UL 854 (SE/USE), UL 4703 (PV wire), UL 62 (flexible cords)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.