Capacitor Code Chart: 104, 103, 102 Values, Tolerance and Voltage Codes

A three-digit capacitor code is in picofarads: two significant digits and a power of ten. 104 = 10 × 10⁴ pF = 100,000 pF = 100 nF = 0.1 µF. A letter after the code is the tolerance (J ±5 %, K ±10 %, M ±20 %); a digit-letter pair in front, such as 2A, is the rated voltage (100 V).

36 codesChecked 2026-11-155 sources

Capacitor codesTap a code for its value and decoding

36 of 36 codes
CodeCapacitance in pFpFCapacitance in nFnFCapacitance in µFµF
Below 1 nF
1R010.0010.000001
4R74.70.00470.0000047
100100.010.00001
220220.0220.000022
330330.0330.000033
470470.0470.000047
1011000.10.0001
1511500.150.00015
2212200.220.00022
3313300.330.00033
4714700.470.00047
6816800.680.00068
1 nF to <1 µF
1021,00010.001
1521,5001.50.0015
2222,2002.20.0022
3323,3003.30.0033
4724,7004.70.0047
6826,8006.80.0068
10310,000100.01
15315,000150.015
22322,000220.022
33333,000330.033
47347,000470.047
68368,000680.068
104100,0001000.1
154150,0001500.15
224220,0002200.22
334330,0003300.33
474470,0004700.47
684680,0006800.68
1 µF and up
1051,000,0001,0001
2252,200,0002,2002.2
4754,700,0004,7004.7
10610,000,00010,00010
22622,000,00022,00022
107100,000,000100,000100

How to read a capacitor code

Three digits: first two are the value, the third is the number of zeros, in pF. 472 = 47 00 pF = 4.7 nF. 101 = 100 pF; 100 = 10 pF (10 followed by no zeros).

Two digits or a plain number below 100 is the value in pF: 47 = 47 pF. R marks a decimal point: 4R7 = 4.7 pF, 1R0 = 1 pF. Some makers use 8 and 9 as the third digit for ×0.01 and ×0.1 (109 = 1.0 pF).

Tolerance letter after the code: B ±0.1 pF, C ±0.25 pF, D ±0.5 pF, F ±1 %, G ±2 %, J ±5 %, K ±10 %, M ±20 %, Z +80/−20 %. 104K = 100 nF ±10 %.

Voltage code (EIA, two characters) on film and some ceramic capacitors: 0J 6.3 V, 1A 10 V, 1C 16 V, 1E 25 V, 1V 35 V, 1H 50 V, 1J 63 V, 2A 100 V, 2D 200 V, 2E 250 V, 2G 400 V, 2W 450 V, 2J 630 V, 3A 1000 V. 2A104J = 100 V, 100 nF, ±5 %.

Electrolytic capacitors are printed in plain text (470 µF 25 V); the stripe marks the negative lead. SMD ceramic capacitors usually carry no marking at all; measure them or keep them in the reel.

About Capacitor Codes

Small ceramic and film capacitors have no room for "0.1 µF", so IEC 60062 uses the same scheme as resistor SMD codes: significant digits plus a multiplier, always in picofarads. Once you remember that 1 nF = 1000 pF and 1 µF = 1000 nF, the codes read themselves: 102 = 1 nF, 103 = 10 nF, 104 = 100 nF, 105 = 1 µF.

Values follow the E series: E6 (10, 15, 22, 33, 47, 68) for most ceramics and electrolytics, E12 for better parts. A code such as 474 or 225 is therefore far more common than 504 or 255.

Old American schematics and parts use µF for everything and "mmF" or "µµF" for picofarads. 0.001 µF = 1 nF = 102; 0.01 µF = 103; 0.1 µF = 104. "MFD" on old capacitors means µF, not millifarad.

Ceramic capacitors also carry a dielectric code. Class I (C0G/NP0) is stable with temperature and voltage, so use it for filters and timing. Class II (X7R, X5R) packs more capacitance but loses some with temperature and DC bias; Y5V and Z5U lose a great deal and are best avoided for anything that matters.

Codes, pF, nF and µF

CodepFnFµF
1011000.10.0001
1021,00010.001
10310,000100.01
104100,0001000.1
1051,000,0001,0001
10610,000,00010,00010
107100,000,000100,000100

Tolerance letters

LetterToleranceTypical on
B±0.1 pFSmall C0G values
C±0.25 pFSmall C0G values
D±0.5 pFSmall C0G values
F±1 %C0G, film
G±2 %C0G, film
J±5 %C0G, film
K±10 %X7R, X5R, film
M±20 %X7R, electrolytic, tantalum
Z+80 / −20 %Y5V, Z5U

EIA voltage codes

CodeVoltageCodeVoltage
0G4 V1K80 V
0J6.3 V2A100 V
1A10 V2D200 V
1C16 V2E250 V
1E25 V2G400 V
1V35 V2W450 V
1H50 V2J630 V
1J63 V3A1000 V

Class II dielectric codes (EIA-198)

Three characters: low temperature, high temperature, capacitance change over that range. X7R = −55 °C to +125 °C, ±15 %. X5R = −55 °C to +85 °C, ±15 %. Y5V = −30 °C to +85 °C, +22/−82 %. Class I C0G (NP0) means 0 ± 30 ppm/K.

Low temp.High temp.Change
X−55 °C5+85 °CF±7.5 %
Y−30 °C6+105 °CP±10 %
Z+10 °C7+125 °CR±15 %
8+150 °CS±22 %
9+200 °CT+22/−33 %
U+22/−56 %
V+22/−82 %

Questions

What is the value of a 104 capacitor?

100,000 pF = 100 nF = 0.1 µF. The code is 10 followed by 4 zeros, in picofarads.

What does 103 mean on a capacitor?

10,000 pF = 10 nF = 0.01 µF.

What does the K in 104K mean?

Tolerance ±10 %. J is ±5 % and M ±20 %.

What does 2A mean on a capacitor?

It is an EIA voltage code: 2A = 100 V. 1H = 50 V, 2E = 250 V, 2J = 630 V.

Is a 100 capacitor 100 pF?

No. 100 is 10 pF (10 × 10⁰). A 100 pF capacitor is marked 101.

How do I convert nF to µF?

Divide by 1000: 100 nF = 0.1 µF, 470 nF = 0.47 µF. From pF to nF divide by 1000 as well: 4700 pF = 4.7 nF.

Sources

  1. IEC 60062:2016, Marking codes for resistors and capacitors
  2. EIA-198 / EIA RS-198: Ceramic dielectric capacitors classes I–IV (temperature characteristic codes)
  3. KEMET: Ceramic capacitor marking and dielectric codes
  4. Murata: Capacitance, tolerance and rated voltage codes
  5. Panasonic: Aluminium electrolytic and film capacitor voltage codes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.