M10 Carriage Bolt Dimensions

Carriage Bolts · Metric: DIN 603 / ISO 8677

An M10 carriage bolt (Metric: DIN 603 / ISO 8677) has a domed head up to 24.65 mm (0.970 in) in diameter and 5.38 mm (0.212 in) high. The square neck is up to 10.58 mm (0.417 in) across and 6.6 mm (0.260 in) deep.

dkHead diameter
24.65 mm0.970 in0.970 in24.65 mm
kHead height
5.38 mm0.212 in0.212 in5.38 mm
vSquare neck width (max)
10.58 mm0.417 in0.417 in10.58 mm
fSquare neck depth (max)
6.6 mm0.260 in0.260 in6.6 mm

Drawing

⌀24.65 mm⌀0.970 in5.38 mm0.212 inM106.6 mm0.260 in
□10.58 mm□0.417 in
Square neck shown dashed in the head viewDrawn to scale · Dimensions in mmDimensions in inches

M10 specifications

dMajor diameter10 mm0.394 in
dkHead diameter24.65 mm0.970 in
kHead height5.38 mm0.212 in
vSquare neck width (max)10.58 mm0.417 in
fSquare neck depth (max)6.6 mm0.260 in

DIN 603 M10: 24.65 mm head, 10.58 mm square; punch an 11 mm square hole in steel.

M10 in other charts

All Carriage Bolts sizes

Compare all 15 sizes in the Carriage Bolts chart →

Sources

  1. DIN 603:2017, Mushroom head square neck bolts
  2. ASME B18.5: Round head bolts (inch series)
  3. Böllhoff: DIN 603 steel 8.8 data sheet
  4. Aspen Fasteners: 1/4"-20 carriage bolts, ASME B18.5 dimensions

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.