M10 Washer Size: Inside and Outside Diameter

Flat Washers

An M10 flat washer (ISO 7089 / DIN 125) has a 10.5 mm (0.413 in) hole, a 20 mm (0.787 in) outside diameter and is 2 mm (0.079 in) thick. Large-series (fender) dimensions to ISO 7093, where the standard lists them, are in the table below.

d₁Inside diameter
10.5 mm0.413 in0.413 in10.5 mm
d₂Outside diameter
20 mm0.787 in0.787 in20 mm
hThickness
2 mm0.079 in0.079 in2 mm

Drawing

⌀10.5 mm⌀0.413 in⌀20 mm⌀0.787 in
h 2 mmh 0.079 in⌀20 mm⌀0.787 in⌀10.5 mm⌀0.413 in
Drawn to scale · Dimensions in mmDimensions in inches

M10 specifications

d₁Inside diameter10.5 mm0.413 in
d₂Outside diameter20 mm0.787 in
hThickness2 mm0.079 in
Outside diameter, large (ISO 7093)30 mm1.181 in
Thickness, large (ISO 7093)2.5 mm0.098 in

M10 in other charts

All Flat Washers sizes

Compare all 24 sizes in the Flat Washers chart →

Sources

  1. ISO 7089:2000, Plain washers, normal series, product grade A
  2. ISO 7093-1:2000, Plain washers, large series, part 1: product grade A
  3. ISO 7093-2:2000, Plain washers, large series, part 2: product grade C (outside diameters and thickness)
  4. fasten.it and Boltport: ISO 7089 dimension tables (M42–M64 cross-check)
  5. ISO 887:2000, Plain washers for metric bolts, screws and nuts, general plan

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.