M10 Thread Size: Pitch, Tap Drill and Clearance Hole
Metric Threads
M10 is a metric thread with a major diameter of 10 mm (0.394 in) and a coarse pitch of 1.5 mm (16.9 TPI). Drill 8.5 mm (0.335 in) before tapping the coarse thread; the common fine thread is M10 × 1.25 mm, tapped with a 8.75 mm drill. For a bolt to pass through, drill a 11 mm (0.433 in) clearance hole (ISO 273 medium).
- PCoarse pitch
- 1.5 mm16.9 TPI16.9 TPI1.5 mm
- Tap drill, coarse
- 8.5 mm0.335 in0.335 in8.5 mm
- Clearance hole, medium
- 11 mm0.433 in0.433 in11 mm
- d₃Minor diameter, bolt
- 8.160 mm0.3213 in0.3213 in8.160 mm
Drawing
M10 specifications
| dMajor diameter | 10 mm0.394 in |
|---|---|
| PCoarse pitch | 1.5 mm16.9 TPI |
| Fine pitch (common) | 1.25 mm20.3 TPI |
| Fine pitches (ISO 261) | 1.25 · 1 · 0.75 |
| Tap drill, coarse | 8.5 mm0.335 in |
| Tap drill, fine | 8.75 mm0.344 in |
| d₂Pitch diameter | 9.026 mm0.3554 in |
| D₁Minor diameter, nut | 8.376 mm0.3298 in |
| d₃Minor diameter, bolt | 8.160 mm0.3213 in |
| Clearance hole, fine | 10.5 mm0.413 in |
| Clearance hole, medium | 11 mm0.433 in |
| Clearance hole, coarse | 12 mm0.472 in |
| ISO 261 size choice | 1st choice (preferred) |
Besides M10 × 1.5 coarse, two fine pitches are common: M10 × 1.25 (automotive, ISO 262 selection) and M10 × 1 (brake and hydraulic fittings, some Japanese vehicles).
Also known as
M10x1.5M10x1.25
Drill sizes for tapping M10
M10 in other charts
All Metric Threads sizes
Sources
- ISO 261:1998, ISO general purpose metric screw threads, general plan
- ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
- ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
- ISO 273:1979, Fasteners, clearance holes for bolts and screws
- Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
- DIN 336: Drill diameters for tapping holes (tap drill sizes)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.