140 mm fan: Hole Spacing and Dimensions

Case Fan Sizes

A 140 mm fan has a 140 mm (5.51 in) square frame. Mounting-hole spacing, centre to centre: 124.5 mm (4.90 in). Common frame thicknesses are 25 mm (some 27–30 mm). Typical use: Case fans, large tower coolers, 140/280/420 mm radiators.

AFrame size
140 mm5.51 in5.51 in140 mm
BHole spacing (centre to centre)
124.5 mm4.90 in4.90 in124.5 mm

Drawing

124.5 mm4.90 in124.5 mm4.90 in140 mm5.51 in
Frame and hole spacing in proportion; blades, hub and hole size indicative.Drawn to scale · Dimensions in mmDimensions in inches

140 mm fan specifications

AFrame size140 mm5.51 in
BHole spacing (centre to centre)124.5 mm4.90 in
Common thicknesses25 mm (some 27–30 mm)
Typical useCase fans, large tower coolers, 140/280/420 mm radiators

3-pin and 4-pin fan connector pinout

PinSignalFunctionTypical wire colour
1GNDGroundblack
2+12 VSupply (on 3-pin fans the board varies this voltage to control speed)red or yellow
3Sense (tach)Speed signal, 2 pulses per revolutionyellow or green
4PWM control25 kHz PWM speed control (4-pin fans only)blue

Most use 124.5 mm hole spacing (a few makers state 125 mm, within the hole tolerance). Some 140 mm fans have round frames or extra 105 mm holes so they also mount on 120 mm positions.

Next smaller and larger fan

All fan sizes

All 10 fan sizes in the Case Fan Sizes chart →

Sources

  1. Arctic: Fan mounting hole pattern drawings (40 mm, 120 mm, 140 mm)
  2. Noctua: 120 mm and 140 mm fan mounting (NF-P14 / NF-A14 dual hole pattern)
  3. Intel: 4-Wire Pulse Width Modulation (PWM) Controlled Fans specification, rev. 1.3
  4. Voltcave: How to measure a PC fan's size (fan size vs hole spacing table)
  5. Wikipedia: Computer fan (fan size vs mounting hole spacing table, connectors)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.