200×75×23 PFC Channel Dimensions & Properties
Channels (UPN, UPE, PFC, JIS) · PFC: British parallel flange channels (BS 4-1)
200×75×23 PFC (PFC: British parallel flange channels, BS 4-1) is 200 mm (7.874 in) deep with a 75 mm (2.953 in) flange, a 6 mm (0.236 in) web and a 12.5 mm (0.492 in) flange. Mass 23.4 kg/m (15.724 lb/ft), area 29.9 cm² (4.635 in²); strong-axis I = 1,960 cm⁴ (47.09 in⁴), Wel = 196 cm³ (11.96 in³).
- hDepth
- 200 mm7.874 in7.874 in200 mm
- bFlange width
- 75 mm2.953 in2.953 in75 mm
- twWeb thickness
- 6 mm0.236 in0.236 in6 mm
- tfFlange thickness
- 12.5 mm0.492 in0.492 in12.5 mm
Drawing
200×75×23 PFC specifications
| hDepth | 200 mm7.874 in |
|---|---|
| bFlange width | 75 mm2.953 in |
| twWeb thickness | 6 mm0.236 in |
| tfFlange thickness | 12.5 mm0.492 in |
| r1Root radius | 12 mm0.472 in |
| GMass | 23.4 kg/m15.724 lb/ft |
| AArea | 29.9 cm²4.635 in² |
| eCentroid from back of web | 2.48 cm0.976 in |
| IyMoment of inertia, strong axis | 1,960 cm⁴47.09 in⁴ |
| Wel,yElastic modulus, strong axis | 196 cm³11.96 in³ |
| Wpl,yPlastic modulus, strong axis | 227 cm³13.85 in³ |
| iyRadius of gyration, strong axis | 8.11 cm3.193 in |
| IzMoment of inertia, weak axis | 170 cm⁴4.08 in⁴ |
| Wel,zElastic modulus, weak axis | 33.8 cm³2.06 in³ |
| izRadius of gyration, weak axis | 2.39 cm0.941 in |
Also known as
PFC200x75x23
Channels of about the same depth in other series
All Channels (UPN, UPE, PFC, JIS) sizes
Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →
Sources
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.