180×90×26 PFC Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · PFC: British parallel flange channels (BS 4-1)

180×90×26 PFC (PFC: British parallel flange channels, BS 4-1) is 180 mm (7.087 in) deep with a 90 mm (3.543 in) flange, a 6.5 mm (0.256 in) web and a 12.5 mm (0.492 in) flange. Mass 26.1 kg/m (17.538 lb/ft), area 33.2 cm² (5.146 in²); strong-axis I = 1,820 cm⁴ (43.73 in⁴), Wel = 202 cm³ (12.33 in³).

hDepth
180 mm7.087 in7.087 in180 mm
bFlange width
90 mm3.543 in3.543 in90 mm
twWeb thickness
6.5 mm0.256 in0.256 in6.5 mm
tfFlange thickness
12.5 mm0.492 in0.492 in12.5 mm

Drawing

90 mm3.543 in180 mm7.087 intf 12.5 mmtf 0.492 intw 6.5 mmtw 0.256 ine 3.17 cme 1.248 in
Drawn to scale · Dimensions in mmDimensions in inches

180×90×26 PFC specifications

hDepth180 mm7.087 in
bFlange width90 mm3.543 in
twWeb thickness6.5 mm0.256 in
tfFlange thickness12.5 mm0.492 in
r1Root radius12 mm0.472 in
GMass26.1 kg/m17.538 lb/ft
AArea33.2 cm²5.146 in²
eCentroid from back of web3.17 cm1.248 in
IyMoment of inertia, strong axis1,820 cm⁴43.73 in⁴
Wel,yElastic modulus, strong axis202 cm³12.33 in³
Wpl,yPlastic modulus, strong axis232 cm³14.16 in³
iyRadius of gyration, strong axis7.4 cm2.913 in
IzMoment of inertia, weak axis277 cm⁴6.65 in⁴
Wel,zElastic modulus, weak axis47.4 cm³2.89 in³
izRadius of gyration, weak axis2.89 cm1.138 in

Also known as

PFC180x90x26

Channels of about the same depth in other series

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.