UPN 200 Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · UPN: European standard channels, tapered flanges (EN 10279, DIN 1026-1)

UPN 200 (UPN: European standard channels, tapered flanges, EN 10279, DIN 1026-1) is 200 mm (7.874 in) deep with a 75 mm (2.953 in) flange, a 8.5 mm (0.335 in) web and a 11.5 mm (0.453 in) flange. Mass 25.3 kg/m (17.001 lb/ft), area 32.2 cm² (4.991 in²); strong-axis I = 1,910 cm⁴ (45.89 in⁴), Wel = 191 cm³ (11.66 in³).

hDepth
200 mm7.874 in7.874 in200 mm
bFlange width
75 mm2.953 in2.953 in75 mm
twWeb thickness
8.5 mm0.335 in0.335 in8.5 mm
tfFlange thickness
11.5 mm0.453 in0.453 in11.5 mm

Drawing

75 mm2.953 in200 mm7.874 intf 11.5 mmtf 0.453 intw 8.5 mmtw 0.335 inr1 11.5 mmr1 0.453 in
Drawn to scale · Dimensions in mmDimensions in inches

UPN 200 specifications

hDepth200 mm7.874 in
bFlange width75 mm2.953 in
twWeb thickness8.5 mm0.335 in
tfFlange thickness11.5 mm0.453 in
r1Root radius11.5 mm0.453 in
r2Toe radius6 mm0.236 in
GMass25.3 kg/m17.001 lb/ft
AArea32.2 cm²4.991 in²
IyMoment of inertia, strong axis1,910 cm⁴45.89 in⁴
Wel,yElastic modulus, strong axis191 cm³11.66 in³
Wpl,yPlastic modulus, strong axis228 cm³13.91 in³
iyRadius of gyration, strong axis7.7 cm3.031 in
IzMoment of inertia, weak axis148 cm⁴3.56 in⁴
Wel,zElastic modulus, weak axis27 cm³1.65 in³
izRadius of gyration, weak axis2.14 cm0.843 in

Also known as

U200UNP200

Channels of about the same depth in other series

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.