200×90×30 PFC Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · PFC: British parallel flange channels (BS 4-1)

200×90×30 PFC (PFC: British parallel flange channels, BS 4-1) is 200 mm (7.874 in) deep with a 90 mm (3.543 in) flange, a 7 mm (0.276 in) web and a 14 mm (0.551 in) flange. Mass 29.7 kg/m (19.957 lb/ft), area 37.9 cm² (5.875 in²); strong-axis I = 2,520 cm⁴ (60.54 in⁴), Wel = 252 cm³ (15.38 in³).

hDepth
200 mm7.874 in7.874 in200 mm
bFlange width
90 mm3.543 in3.543 in90 mm
twWeb thickness
7 mm0.276 in0.276 in7 mm
tfFlange thickness
14 mm0.551 in0.551 in14 mm

Drawing

90 mm3.543 in200 mm7.874 intf 14 mmtf 0.551 intw 7 mmtw 0.276 ine 3.12 cme 1.228 in
Drawn to scale · Dimensions in mmDimensions in inches

200×90×30 PFC specifications

hDepth200 mm7.874 in
bFlange width90 mm3.543 in
twWeb thickness7 mm0.276 in
tfFlange thickness14 mm0.551 in
r1Root radius12 mm0.472 in
GMass29.7 kg/m19.957 lb/ft
AArea37.9 cm²5.875 in²
eCentroid from back of web3.12 cm1.228 in
IyMoment of inertia, strong axis2,520 cm⁴60.54 in⁴
Wel,yElastic modulus, strong axis252 cm³15.38 in³
Wpl,yPlastic modulus, strong axis291 cm³17.76 in³
iyRadius of gyration, strong axis8.16 cm3.213 in
IzMoment of inertia, weak axis314 cm⁴7.54 in⁴
Wel,zElastic modulus, weak axis53.4 cm³3.26 in³
izRadius of gyration, weak axis2.88 cm1.134 in

Also known as

PFC200x90x30

Channels of about the same depth in other series

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.