230×75×26 PFC Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · PFC: British parallel flange channels (BS 4-1)

230×75×26 PFC (PFC: British parallel flange channels, BS 4-1) is 230 mm (9.055 in) deep with a 75 mm (2.953 in) flange, a 6.5 mm (0.256 in) web and a 12.5 mm (0.492 in) flange. Mass 25.7 kg/m (17.270 lb/ft), area 32.7 cm² (5.069 in²); strong-axis I = 2,750 cm⁴ (66.07 in⁴), Wel = 239 cm³ (14.58 in³).

hDepth
230 mm9.055 in9.055 in230 mm
bFlange width
75 mm2.953 in2.953 in75 mm
twWeb thickness
6.5 mm0.256 in0.256 in6.5 mm
tfFlange thickness
12.5 mm0.492 in0.492 in12.5 mm

Drawing

75 mm2.953 in230 mm9.055 intf 12.5 mmtf 0.492 intw 6.5 mmtw 0.256 ine 2.3 cme 0.906 in
Drawn to scale · Dimensions in mmDimensions in inches

230×75×26 PFC specifications

hDepth230 mm9.055 in
bFlange width75 mm2.953 in
twWeb thickness6.5 mm0.256 in
tfFlange thickness12.5 mm0.492 in
r1Root radius12 mm0.472 in
GMass25.7 kg/m17.270 lb/ft
AArea32.7 cm²5.069 in²
eCentroid from back of web2.3 cm0.906 in
IyMoment of inertia, strong axis2,750 cm⁴66.07 in⁴
Wel,yElastic modulus, strong axis239 cm³14.58 in³
Wpl,yPlastic modulus, strong axis278 cm³16.96 in³
iyRadius of gyration, strong axis9.17 cm3.610 in
IzMoment of inertia, weak axis181 cm⁴4.35 in⁴
Wel,zElastic modulus, weak axis34.8 cm³2.12 in³
izRadius of gyration, weak axis2.35 cm0.925 in

Also known as

PFC230x75x26

Channels of about the same depth in other series

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.