UPN 380 Channel Dimensions & Properties
Channels (UPN, UPE, PFC, JIS) · UPN: European standard channels, tapered flanges (EN 10279, DIN 1026-1)
UPN 380 (UPN: European standard channels, tapered flanges, EN 10279, DIN 1026-1) is 380 mm (14.961 in) deep with a 102 mm (4.016 in) flange, a 13.5 mm (0.531 in) web and a 16 mm (0.630 in) flange. Mass 63.1 kg/m (42.401 lb/ft), area 80.4 cm² (12.462 in²); strong-axis I = 15,800 cm⁴ (379.6 in⁴), Wel = 829 cm³ (50.59 in³).
- hDepth
- 380 mm14.961 in14.961 in380 mm
- bFlange width
- 102 mm4.016 in4.016 in102 mm
- twWeb thickness
- 13.5 mm0.531 in0.531 in13.5 mm
- tfFlange thickness
- 16 mm0.630 in0.630 in16 mm
Drawing
UPN 380 specifications
| hDepth | 380 mm14.961 in |
|---|---|
| bFlange width | 102 mm4.016 in |
| twWeb thickness | 13.5 mm0.531 in |
| tfFlange thickness | 16 mm0.630 in |
| r1Root radius | 16 mm0.630 in |
| r2Toe radius | 8 mm0.315 in |
| GMass | 63.1 kg/m42.401 lb/ft |
| AArea | 80.4 cm²12.462 in² |
| IyMoment of inertia, strong axis | 15,800 cm⁴379.6 in⁴ |
| Wel,yElastic modulus, strong axis | 829 cm³50.59 in³ |
| Wpl,yPlastic modulus, strong axis | 1,010 cm³61.63 in³ |
| iyRadius of gyration, strong axis | 14 cm5.512 in |
| IzMoment of inertia, weak axis | 615 cm⁴14.78 in⁴ |
| Wel,zElastic modulus, weak axis | 79 cm³4.82 in³ |
| izRadius of gyration, weak axis | 2.77 cm1.091 in |
Also known as
U380UNP380
Channels of about the same depth in other series
All Channels (UPN, UPE, PFC, JIS) sizes
Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →
Sources
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.