UPE 360 Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · UPE: European channels, parallel flanges

UPE 360 (UPE: European channels, parallel flanges) is 360 mm (14.173 in) deep with a 110 mm (4.331 in) flange, a 12 mm (0.472 in) web and a 17 mm (0.669 in) flange. Mass 61.2 kg/m (41.125 lb/ft), area 77.9 cm² (12.075 in²); strong-axis I = 14,800 cm⁴ (355.57 in⁴), Wel = 824 cm³ (50.28 in³).

hDepth
360 mm14.173 in14.173 in360 mm
bFlange width
110 mm4.331 in4.331 in110 mm
twWeb thickness
12 mm0.472 in0.472 in12 mm
tfFlange thickness
17 mm0.669 in0.669 in17 mm

Drawing

110 mm4.331 in360 mm14.173 intf 17 mmtf 0.669 intw 12 mmtw 0.472 ine 2.97 cme 1.169 in
Drawn to scale · Dimensions in mmDimensions in inches

UPE 360 specifications

hDepth360 mm14.173 in
bFlange width110 mm4.331 in
twWeb thickness12 mm0.472 in
tfFlange thickness17 mm0.669 in
r1Root radius18 mm0.709 in
GMass61.2 kg/m41.125 lb/ft
AArea77.9 cm²12.075 in²
eCentroid from back of web2.97 cm1.169 in
IyMoment of inertia, strong axis14,800 cm⁴355.57 in⁴
Wel,yElastic modulus, strong axis824 cm³50.28 in³
Wpl,yPlastic modulus, strong axis982 cm³59.93 in³
iyRadius of gyration, strong axis13.8 cm5.433 in
IzMoment of inertia, weak axis844 cm⁴20.28 in⁴
Wel,zElastic modulus, weak axis105 cm³6.41 in³
izRadius of gyration, weak axis3.29 cm1.295 in

Channels of about the same depth in other series

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.