UPN 280 Channel Dimensions & Properties
Channels (UPN, UPE, PFC, JIS) · UPN: European standard channels, tapered flanges (EN 10279, DIN 1026-1)
UPN 280 (UPN: European standard channels, tapered flanges, EN 10279, DIN 1026-1) is 280 mm (11.024 in) deep with a 95 mm (3.740 in) flange, a 10 mm (0.394 in) web and a 15 mm (0.591 in) flange. Mass 41.8 kg/m (28.088 lb/ft), area 53.3 cm² (8.262 in²); strong-axis I = 6,280 cm⁴ (150.88 in⁴), Wel = 448 cm³ (27.34 in³).
- hDepth
- 280 mm11.024 in11.024 in280 mm
- bFlange width
- 95 mm3.740 in3.740 in95 mm
- twWeb thickness
- 10 mm0.394 in0.394 in10 mm
- tfFlange thickness
- 15 mm0.591 in0.591 in15 mm
Drawing
UPN 280 specifications
| hDepth | 280 mm11.024 in |
|---|---|
| bFlange width | 95 mm3.740 in |
| twWeb thickness | 10 mm0.394 in |
| tfFlange thickness | 15 mm0.591 in |
| r1Root radius | 15 mm0.591 in |
| r2Toe radius | 7.5 mm0.295 in |
| GMass | 41.8 kg/m28.088 lb/ft |
| AArea | 53.3 cm²8.262 in² |
| IyMoment of inertia, strong axis | 6,280 cm⁴150.88 in⁴ |
| Wel,yElastic modulus, strong axis | 448 cm³27.34 in³ |
| Wpl,yPlastic modulus, strong axis | 532 cm³32.46 in³ |
| iyRadius of gyration, strong axis | 10.9 cm4.291 in |
| IzMoment of inertia, weak axis | 399 cm⁴9.59 in⁴ |
| Wel,zElastic modulus, weak axis | 57 cm³3.48 in³ |
| izRadius of gyration, weak axis | 2.74 cm1.079 in |
Also known as
U280UNP280
Channels of about the same depth in other series
All Channels (UPN, UPE, PFC, JIS) sizes
Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →
Sources
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.