UPN 300 Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · UPN: European standard channels, tapered flanges (EN 10279, DIN 1026-1)

UPN 300 (UPN: European standard channels, tapered flanges, EN 10279, DIN 1026-1) is 300 mm (11.811 in) deep with a 100 mm (3.937 in) flange, a 10 mm (0.394 in) web and a 16 mm (0.630 in) flange. Mass 46.2 kg/m (31.045 lb/ft), area 58.8 cm² (9.114 in²); strong-axis I = 8,030 cm⁴ (192.92 in⁴), Wel = 535 cm³ (32.65 in³).

hDepth
300 mm11.811 in11.811 in300 mm
bFlange width
100 mm3.937 in3.937 in100 mm
twWeb thickness
10 mm0.394 in0.394 in10 mm
tfFlange thickness
16 mm0.630 in0.630 in16 mm

Drawing

100 mm3.937 in300 mm11.811 intf 16 mmtf 0.630 intw 10 mmtw 0.394 inr1 16 mmr1 0.630 in
Drawn to scale · Dimensions in mmDimensions in inches

UPN 300 specifications

hDepth300 mm11.811 in
bFlange width100 mm3.937 in
twWeb thickness10 mm0.394 in
tfFlange thickness16 mm0.630 in
r1Root radius16 mm0.630 in
r2Toe radius8 mm0.315 in
GMass46.2 kg/m31.045 lb/ft
AArea58.8 cm²9.114 in²
IyMoment of inertia, strong axis8,030 cm⁴192.92 in⁴
Wel,yElastic modulus, strong axis535 cm³32.65 in³
Wpl,yPlastic modulus, strong axis632 cm³38.57 in³
iyRadius of gyration, strong axis11.7 cm4.606 in
IzMoment of inertia, weak axis495 cm⁴11.89 in⁴
Wel,zElastic modulus, weak axis68 cm³4.15 in³
izRadius of gyration, weak axis2.9 cm1.142 in

Also known as

U300UNP300

Channels of about the same depth in other series

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.