UPN 260 Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · UPN: European standard channels, tapered flanges (EN 10279, DIN 1026-1)

UPN 260 (UPN: European standard channels, tapered flanges, EN 10279, DIN 1026-1) is 260 mm (10.236 in) deep with a 90 mm (3.543 in) flange, a 10 mm (0.394 in) web and a 14 mm (0.551 in) flange. Mass 37.9 kg/m (25.468 lb/ft), area 48.3 cm² (7.487 in²); strong-axis I = 4,820 cm⁴ (115.8 in⁴), Wel = 371 cm³ (22.64 in³).

hDepth
260 mm10.236 in10.236 in260 mm
bFlange width
90 mm3.543 in3.543 in90 mm
twWeb thickness
10 mm0.394 in0.394 in10 mm
tfFlange thickness
14 mm0.551 in0.551 in14 mm

Drawing

90 mm3.543 in260 mm10.236 intf 14 mmtf 0.551 intw 10 mmtw 0.394 inr1 14 mmr1 0.551 in
Drawn to scale · Dimensions in mmDimensions in inches

UPN 260 specifications

hDepth260 mm10.236 in
bFlange width90 mm3.543 in
twWeb thickness10 mm0.394 in
tfFlange thickness14 mm0.551 in
r1Root radius14 mm0.551 in
r2Toe radius7 mm0.276 in
GMass37.9 kg/m25.468 lb/ft
AArea48.3 cm²7.487 in²
IyMoment of inertia, strong axis4,820 cm⁴115.8 in⁴
Wel,yElastic modulus, strong axis371 cm³22.64 in³
Wpl,yPlastic modulus, strong axis442 cm³26.97 in³
iyRadius of gyration, strong axis9.99 cm3.933 in
IzMoment of inertia, weak axis317 cm⁴7.62 in⁴
Wel,zElastic modulus, weak axis48 cm³2.93 in³
izRadius of gyration, weak axis2.56 cm1.008 in

Also known as

U260UNP260

Channels of about the same depth in other series

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.