UPN 320 Channel Dimensions & Properties
Channels (UPN, UPE, PFC, JIS) · UPN: European standard channels, tapered flanges (EN 10279, DIN 1026-1)
UPN 320 (UPN: European standard channels, tapered flanges, EN 10279, DIN 1026-1) is 320 mm (12.598 in) deep with a 100 mm (3.937 in) flange, a 14 mm (0.551 in) web and a 17.5 mm (0.689 in) flange. Mass 59.5 kg/m (39.982 lb/ft), area 75.8 cm² (11.749 in²); strong-axis I = 10,900 cm⁴ (261.87 in⁴), Wel = 679 cm³ (41.44 in³).
- hDepth
- 320 mm12.598 in12.598 in320 mm
- bFlange width
- 100 mm3.937 in3.937 in100 mm
- twWeb thickness
- 14 mm0.551 in0.551 in14 mm
- tfFlange thickness
- 17.5 mm0.689 in0.689 in17.5 mm
Drawing
UPN 320 specifications
| hDepth | 320 mm12.598 in |
|---|---|
| bFlange width | 100 mm3.937 in |
| twWeb thickness | 14 mm0.551 in |
| tfFlange thickness | 17.5 mm0.689 in |
| r1Root radius | 17.5 mm0.689 in |
| r2Toe radius | 9 mm0.354 in |
| GMass | 59.5 kg/m39.982 lb/ft |
| AArea | 75.8 cm²11.749 in² |
| IyMoment of inertia, strong axis | 10,900 cm⁴261.87 in⁴ |
| Wel,yElastic modulus, strong axis | 679 cm³41.44 in³ |
| Wpl,yPlastic modulus, strong axis | 826 cm³50.41 in³ |
| iyRadius of gyration, strong axis | 12.1 cm4.764 in |
| IzMoment of inertia, weak axis | 597 cm⁴14.34 in⁴ |
| Wel,zElastic modulus, weak axis | 81 cm³4.94 in³ |
| izRadius of gyration, weak axis | 2.81 cm1.106 in |
Also known as
U320UNP320
Channels of about the same depth in other series
All Channels (UPN, UPE, PFC, JIS) sizes
Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →
Sources
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.