M2 Countersunk Screw Dimensions

Countersunk Screws

Head dimensions of the M2 countersunk screw (90° head) in each standard that covers this size: hex socket ISO 10642 and DIN 7991, cross recessed ISO 7046 and DIN 965. A value that is missing below does not exist for M2 in that standard. The hex socket versions start at M3, the cross recessed ones end at M10.

Head dia. ISO 7046 (max)
3.8 mm0.150 in0.150 in3.8 mm

Drawing

⌀3.8 mm⌀0.150 in1.2 mm0.0472 inM290°
PH0
ISO 7046 cross recessed head shownDrawn to scale · Dimensions in mmDimensions in inches

M2 specifications

dMajor diameter2 mm0.079 in
PPitch0.4 mm0.0157 in
Head dia. ISO 7046 (max)3.8 mm0.150 in
Head height ISO 7046 (max)1.2 mm0.0472 in
Cross recess ISO 7046PH0 / PZ0
Head dia. DIN 9653.8 mm0.150 in
Head height DIN 9651.2 mm0.0472 in

The 2019 edition of ISO 10642 extends the hex socket range down to M2, but most catalogues still offer M2 and M2.5 countersunk screws with a cross recess only. We list the ISO 7046 values, which are the ones you will normally meet.

Also known as

M2x0.4

M2 in other charts

All Countersunk Screws sizes

Compare all 13 sizes in the Countersunk Screws chart →

Sources

  1. ISO 10642:2019, Hexagon socket countersunk head screws with reduced loadability
  2. ISO 7046-1:2011, Cross-recessed countersunk flat head screws (common head), steel 4.8
  3. Westfield Fasteners: ISO 10642 / DIN 7991 socket countersunk screw dimensions
  4. fasten.it: DIN EN ISO 7046-1 and DIN 965 dimension tables
  5. Böllhoff: DIN 965 stainless A4 cross recess, product data sheet

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.