M2 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M2 is a metric thread with a major diameter of 2 mm (0.079 in) and a coarse pitch of 0.4 mm (63.5 TPI). Drill 1.6 mm (0.063 in) before tapping the coarse thread; the common fine thread is M2 × 0.25 mm, tapped with a 1.75 mm drill. For a bolt to pass through, drill a 2.4 mm (0.094 in) clearance hole (ISO 273 medium).

PCoarse pitch
0.4 mm63.5 TPI63.5 TPI0.4 mm
Tap drill, coarse
1.6 mm0.063 in0.063 in1.6 mm
Clearance hole, medium
2.4 mm0.094 in0.094 in2.4 mm
d₃Minor diameter, bolt
1.509 mm0.0594 in0.0594 in1.509 mm

Drawing

⌀2 mm⌀0.079 in⌀1.509 mm⌀0.0594 inP 0.4 mmP 63.5 TPI
P 0.4 mmP 63.5 TPI0.217 mm0.0085 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M2 specifications

dMajor diameter2 mm0.079 in
PCoarse pitch0.4 mm63.5 TPI
Fine pitch (common)0.25 mm101.6 TPI
Fine pitches (ISO 261)0.25
Tap drill, coarse1.6 mm0.063 in
Tap drill, fine1.75 mm0.069 in
d₂Pitch diameter1.740 mm0.0685 in
D₁Minor diameter, nut1.567 mm0.0617 in
d₃Minor diameter, bolt1.509 mm0.0594 in
Clearance hole, fine2.2 mm0.087 in
Clearance hole, medium2.4 mm0.094 in
Clearance hole, coarse2.6 mm0.102 in
ISO 261 size choice1st choice (preferred)

M2 is common in electronics, RC models and 3D printer parts. Its tap drill is 1.6 mm.

Also known as

M2x0.4M2x0.25

Drill sizes for tapping M2

M2 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.