M2 Set Screw Dimensions
Set Screws
An M2 socket set screw takes a 0.9 mm (0.035 in) hex key in every point style. The flat and dog points are up to 1 mm (0.039 in) in diameter, the cup point 1 mm (0.039 in), and the cone point ends in a 0.5 mm (0.0197 in) flat. The long dog point is at least 1 mm (0.0394 in) long.
- sHex key size
- 0.9 mm0.035 in0.035 in0.9 mm
- dpFlat / dog point dia. (max)
- 1 mm0.039 in0.039 in1 mm
- dzCup point dia. (max)
- 1 mm0.039 in0.039 in1 mm
- dtCone point tip dia. (max)
- 0.5 mm0.0197 in0.0197 in0.5 mm
Drawing
M2 specifications
| dMajor diameter | 2 mm0.079 in |
|---|---|
| PPitch | 0.4 mm0.0157 in |
| sHex key size | 0.9 mm0.035 in |
| dpFlat / dog point dia. (max) | 1 mm0.039 in |
| dtCone point tip dia. (max) | 0.5 mm0.0197 in |
| dzCup point dia. (max) | 1 mm0.039 in |
| z1Dog length, short (min) | 0.5 mm0.0197 in |
| z2Dog length, long (min) | 1 mm0.0394 in |
Also known as
M2x0.4
Hex key for the M2
M2 in other charts
All Set Screws sizes
Sources
- ISO 4026 / 4027 / 4028 / 4029: Hexagon socket set screws with flat, cone, dog and cup point
- Westfield Fasteners: ISO 4026 (DIN 913) flat point set screw dimensions
- Westfield Fasteners: ISO 4027 (DIN 914) cone point set screw dimensions
- Westfield Fasteners: ISO 4028 (DIN 915) dog point set screw dimensions
- Westfield Fasteners: ISO 4029 (DIN 916) cup point set screw dimensions
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.