M20 Countersunk Screw Dimensions
Countersunk Screws
Head dimensions of the M20 countersunk screw (90° head) in each standard that covers this size: hex socket ISO 10642 and DIN 7991, cross recessed ISO 7046 and DIN 965. A value that is missing below does not exist for M20 in that standard. The hex socket versions start at M3, the cross recessed ones end at M10.
- dkHead dia. ISO 10642 (theor. max)
- 40.32 mm1.5874 in1.5874 in40.32 mm
- kHead height ISO 10642 (max)
- 10.16 mm0.4000 in0.4000 in10.16 mm
- sHex key ISO 10642 / DIN 7991
- 12 mm0.472 in0.472 in12 mm
Drawing
M20 specifications
| dMajor diameter | 20 mm0.787 in |
|---|---|
| PPitch | 2.5 mm0.0984 in |
| dkHead dia. ISO 10642 (theor. max) | 40.32 mm1.5874 in |
| Head dia. ISO 10642 (actual min) | 36.05 mm1.4193 in |
| kHead height ISO 10642 (max) | 10.16 mm0.4000 in |
| sHex key ISO 10642 / DIN 7991 | 12 mm0.472 in |
| Head dia. DIN 7991 | 36 mm1.417 in |
| Head height DIN 7991 | 8.5 mm0.3346 in |
Also known as
M20x2.5
Hex key for the M20
M20 in other charts
All Countersunk Screws sizes
Sources
- ISO 10642:2019, Hexagon socket countersunk head screws with reduced loadability
- ISO 7046-1:2011, Cross-recessed countersunk flat head screws (common head), steel 4.8
- Westfield Fasteners: ISO 10642 / DIN 7991 socket countersunk screw dimensions
- fasten.it: DIN EN ISO 7046-1 and DIN 965 dimension tables
- Böllhoff: DIN 965 stainless A4 cross recess, product data sheet
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.