M20 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M20 is a metric thread with a major diameter of 20 mm (0.787 in) and a coarse pitch of 2.5 mm (10.2 TPI). Drill 17.5 mm (0.689 in) before tapping the coarse thread; the common fine thread is M20 × 1.5 mm, tapped with a 18.5 mm drill. For a bolt to pass through, drill a 22 mm (0.866 in) clearance hole (ISO 273 medium).

PCoarse pitch
2.5 mm10.2 TPI10.2 TPI2.5 mm
Tap drill, coarse
17.5 mm0.689 in0.689 in17.5 mm
Clearance hole, medium
22 mm0.866 in0.866 in22 mm
d₃Minor diameter, bolt
16.933 mm0.6667 in0.6667 in16.933 mm

Drawing

⌀20 mm⌀0.787 in⌀16.933 mm⌀0.6667 inP 2.5 mmP 10.2 TPI
P 2.5 mmP 10.2 TPI1.353 mm0.0533 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M20 specifications

dMajor diameter20 mm0.787 in
PCoarse pitch2.5 mm10.2 TPI
Fine pitch (common)1.5 mm16.9 TPI
Fine pitches (ISO 261)2 · 1.5 · 1
Tap drill, coarse17.5 mm0.689 in
Tap drill, fine18.5 mm0.728 in
d₂Pitch diameter18.376 mm0.7235 in
D₁Minor diameter, nut17.294 mm0.6809 in
d₃Minor diameter, bolt16.933 mm0.6667 in
Clearance hole, fine21 mm0.827 in
Clearance hole, medium22 mm0.866 in
Clearance hole, coarse24 mm0.945 in
ISO 261 size choice1st choice (preferred)

ISO 262 lists both M20 × 2 and M20 × 1.5 as fine threads; 1.5 is more common in fittings and machine building.

Also known as

M20x2.5M20x1.5

M20 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.