M16 Countersunk Screw Dimensions

Countersunk Screws

Head dimensions of the M16 countersunk screw (90° head) in each standard that covers this size: hex socket ISO 10642 and DIN 7991, cross recessed ISO 7046 and DIN 965. A value that is missing below does not exist for M16 in that standard. The hex socket versions start at M3, the cross recessed ones end at M10.

dkHead dia. ISO 10642 (theor. max)
33.6 mm1.3228 in1.3228 in33.6 mm
kHead height ISO 10642 (max)
8.8 mm0.3465 in0.3465 in8.8 mm
sHex key ISO 10642 / DIN 7991
10 mm0.394 in0.394 in10 mm

Drawing

⌀33.6 mm⌀1.3228 in8.8 mm0.3465 inM1690°
s 10 mms 0.394 in
ISO 10642 hex socket head shownDrawn to scale · Dimensions in mmDimensions in inches

M16 specifications

dMajor diameter16 mm0.630 in
PPitch2 mm0.0787 in
dkHead dia. ISO 10642 (theor. max)33.6 mm1.3228 in
Head dia. ISO 10642 (actual min)29.01 mm1.1421 in
kHead height ISO 10642 (max)8.8 mm0.3465 in
sHex key ISO 10642 / DIN 799110 mm0.394 in
Head dia. DIN 799130 mm1.181 in
Head height DIN 79917.5 mm0.2953 in

Also known as

M16x2

Hex key for the M16

M16 in other charts

All Countersunk Screws sizes

Compare all 13 sizes in the Countersunk Screws chart →

Sources

  1. ISO 10642:2019, Hexagon socket countersunk head screws with reduced loadability
  2. ISO 7046-1:2011, Cross-recessed countersunk flat head screws (common head), steel 4.8
  3. Westfield Fasteners: ISO 10642 / DIN 7991 socket countersunk screw dimensions
  4. fasten.it: DIN EN ISO 7046-1 and DIN 965 dimension tables
  5. Böllhoff: DIN 965 stainless A4 cross recess, product data sheet

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.