M3.5 Countersunk Screw Dimensions
Countersunk Screws
Head dimensions of the M3.5 countersunk screw (90° head) in each standard that covers this size: hex socket ISO 10642 and DIN 7991, cross recessed ISO 7046 and DIN 965. A value that is missing below does not exist for M3.5 in that standard. The hex socket versions start at M3, the cross recessed ones end at M10.
- Head dia. ISO 7046 (max)
- 7.3 mm0.287 in0.287 in7.3 mm
Drawing
M3.5 specifications
| dMajor diameter | 3.5 mm0.138 in |
|---|---|
| PPitch | 0.6 mm0.0236 in |
| Head dia. ISO 7046 (max) | 7.3 mm0.287 in |
| Head height ISO 7046 (max) | 2.35 mm0.0925 in |
| Cross recess ISO 7046 | PH2 / PZ2 |
M3.5 is a non-preferred size used mainly in electronics and appliance fittings, with a cross recess.
Also known as
M3.5x0.6
M3.5 in other charts
All Countersunk Screws sizes
Sources
- ISO 10642:2019, Hexagon socket countersunk head screws with reduced loadability
- ISO 7046-1:2011, Cross-recessed countersunk flat head screws (common head), steel 4.8
- Westfield Fasteners: ISO 10642 / DIN 7991 socket countersunk screw dimensions
- fasten.it: DIN EN ISO 7046-1 and DIN 965 dimension tables
- Böllhoff: DIN 965 stainless A4 cross recess, product data sheet
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.