M3.5 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M3.5 is a metric thread with a major diameter of 3.5 mm (0.138 in) and a coarse pitch of 0.6 mm (42.3 TPI). Drill 2.9 mm (0.114 in) before tapping the coarse thread; the common fine thread is M3.5 × 0.35 mm, tapped with a 3.15 mm drill. For a bolt to pass through, drill a 3.9 mm (0.154 in) clearance hole (ISO 273 medium).

PCoarse pitch
0.6 mm42.3 TPI42.3 TPI0.6 mm
Tap drill, coarse
2.9 mm0.114 in0.114 in2.9 mm
Clearance hole, medium
3.9 mm0.154 in0.154 in3.9 mm
d₃Minor diameter, bolt
2.764 mm0.1088 in0.1088 in2.764 mm

Drawing

⌀3.5 mm⌀0.138 in⌀2.764 mm⌀0.1088 inP 0.6 mmP 42.3 TPI
P 0.6 mmP 42.3 TPI0.325 mm0.0128 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M3.5 specifications

dMajor diameter3.5 mm0.138 in
PCoarse pitch0.6 mm42.3 TPI
Fine pitch (common)0.35 mm72.6 TPI
Fine pitches (ISO 261)0.35
Tap drill, coarse2.9 mm0.114 in
Tap drill, fine3.15 mm0.124 in
d₂Pitch diameter3.110 mm0.1224 in
D₁Minor diameter, nut2.850 mm0.1122 in
d₃Minor diameter, bolt2.764 mm0.1088 in
Clearance hole, fine3.7 mm0.146 in
Clearance hole, medium3.9 mm0.154 in
Clearance hole, coarse4.2 mm0.165 in
ISO 261 size choice2nd choice

M3.5 is a second-choice size. It shows up in electrical terminals and some appliance screws; check before assuming M3 or M4.

Also known as

M3.5x0.6M3.5x0.35

Drill sizes for tapping M3.5

M3.5 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.