M4 Countersunk Screw Dimensions
Countersunk Screws
Head dimensions of the M4 countersunk screw (90° head) in each standard that covers this size: hex socket ISO 10642 and DIN 7991, cross recessed ISO 7046 and DIN 965. A value that is missing below does not exist for M4 in that standard. The hex socket versions start at M3, the cross recessed ones end at M10.
- dkHead dia. ISO 10642 (theor. max)
- 8.96 mm0.3528 in0.3528 in8.96 mm
- kHead height ISO 10642 (max)
- 2.48 mm0.0976 in0.0976 in2.48 mm
- sHex key ISO 10642 / DIN 7991
- 2.5 mm0.098 in0.098 in2.5 mm
- Head dia. ISO 7046 (max)
- 8.4 mm0.331 in0.331 in8.4 mm
Drawing
M4 specifications
| dMajor diameter | 4 mm0.157 in |
|---|---|
| PPitch | 0.7 mm0.0276 in |
| dkHead dia. ISO 10642 (theor. max) | 8.96 mm0.3528 in |
| Head dia. ISO 10642 (actual min) | 7.53 mm0.2965 in |
| kHead height ISO 10642 (max) | 2.48 mm0.0976 in |
| sHex key ISO 10642 / DIN 7991 | 2.5 mm0.098 in |
| Head dia. DIN 7991 | 8 mm0.315 in |
| Head height DIN 7991 | 2.3 mm0.0906 in |
| Head dia. ISO 7046 (max) | 8.4 mm0.331 in |
| Head height ISO 7046 (max) | 2.7 mm0.1063 in |
| Cross recess ISO 7046 | PH2 / PZ2 |
| Head dia. DIN 965 | 7.5 mm0.295 in |
| Head height DIN 965 | 2.2 mm0.0866 in |
Also known as
M4x0.7
Hex key for the M4
M4 in other charts
All Countersunk Screws sizes
Sources
- ISO 10642:2019, Hexagon socket countersunk head screws with reduced loadability
- ISO 7046-1:2011, Cross-recessed countersunk flat head screws (common head), steel 4.8
- Westfield Fasteners: ISO 10642 / DIN 7991 socket countersunk screw dimensions
- fasten.it: DIN EN ISO 7046-1 and DIN 965 dimension tables
- Böllhoff: DIN 965 stainless A4 cross recess, product data sheet
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.