ABS Filament: Temperatures, Density and Length per kg

3D Printer Filament · Materials · length per kg at 1.75 mm

ABS filament. Typical settings and properties are listed below, with the length of a 1 kg spool computed from the density. Always start from the temperatures printed on your spool.

Nozzle temperature (typical)
230–260°C446–500°F446–500°F230–260°C
Bed temperature (typical)
95–110°C203–230°F203–230°F95–110°C
ρDensity (typical)
1.04 g/cm³0.0376 lb/in³0.0376 lb/in³1.04 g/cm³
Length per kg
400 m1312 ft1312 ft400 m

Drawing

050100150200250300°Cbed95–110°C203–230°Fnozzle230–260°C446–500°FTg 105°C221°F
Typical bed and nozzle ranges with glass transition (Tg), °C.Proportions shown, not to scale

ABS specifications

Nozzle temperature (typical)230–260°C446–500°F
Bed temperature (typical)95–110°C203–230°F
TgGlass transition (approx.)105°C221°F
ρDensity (typical)1.04 g/cm³0.0376 lb/in³
EnclosureRequired (warping, fumes)
Length per kg400 m1312 ft
Length per kg at 2.85 mm151 m495 ft

ABS needs an enclosure: drafts cause warping and layer splitting. Printing releases styrene and ultrafine particles; ventilate or filter. Parts can be smoothed with acetone vapor.

All filaments

Compare all 16 diameters and materials →

Sources

  1. Prusa Knowledge Base: Material guide (PLA, PETG, ASA, PC, Polyamide pages)
  2. Prusament technical data sheets (diameter tolerance ±0.02 mm, densities)
  3. Ultimaker: material technical data sheets (2.85 mm filaments)
  4. Simplify3D: Filament properties table
  5. Victrex: PEEK 450G datasheet (Tg 143 °C, density 1.30 g/cm³)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.