ASA Filament: Temperatures, Density and Length per kg

3D Printer Filament · Materials · length per kg at 1.75 mm

ASA filament. Typical settings and properties are listed below, with the length of a 1 kg spool computed from the density. Always start from the temperatures printed on your spool.

Nozzle temperature (typical)
240–260°C464–500°F464–500°F240–260°C
Bed temperature (typical)
90–110°C194–230°F194–230°F90–110°C
ρDensity (typical)
1.07 g/cm³0.0387 lb/in³0.0387 lb/in³1.07 g/cm³
Length per kg
389 m1276 ft1276 ft389 m

Drawing

050100150200250300°Cbed90–110°C194–230°Fnozzle240–260°C464–500°FTg 100°C212°F
Typical bed and nozzle ranges with glass transition (Tg), °C.Proportions shown, not to scale

ASA specifications

Nozzle temperature (typical)240–260°C464–500°F
Bed temperature (typical)90–110°C194–230°F
TgGlass transition (approx.)100°C212°F
ρDensity (typical)1.07 g/cm³0.0387 lb/in³
EnclosureRequired (warping, fumes)
Length per kg389 m1276 ft
Length per kg at 2.85 mm146 m479 ft

ASA prints like ABS but resists UV and weathering, making it the usual choice for outdoor parts. Enclosure and ventilation as for ABS.

All filaments

Compare all 16 diameters and materials →

Sources

  1. Prusa Knowledge Base: Material guide (PLA, PETG, ASA, PC, Polyamide pages)
  2. Prusament technical data sheets (diameter tolerance ±0.02 mm, densities)
  3. Ultimaker: material technical data sheets (2.85 mm filaments)
  4. Simplify3D: Filament properties table
  5. Victrex: PEEK 450G datasheet (Tg 143 °C, density 1.30 g/cm³)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.