TPU 95A Filament: Temperatures, Density and Length per kg
3D Printer Filament · Materials · length per kg at 1.75 mm
TPU 95A filament. Typical settings and properties are listed below, with the length of a 1 kg spool computed from the density. Always start from the temperatures printed on your spool.
- Nozzle temperature (typical)
- 210–240°C410–464°F410–464°F210–240°C
- Bed temperature (typical)
- 30–60°C86–140°F86–140°F30–60°C
- ρDensity (typical)
- 1.21 g/cm³0.0437 lb/in³0.0437 lb/in³1.21 g/cm³
- Length per kg
- 344 m1129 ft1129 ft344 m
Drawing
TPU 95A specifications
| Nozzle temperature (typical) | 210–240°C410–464°F |
|---|---|
| Bed temperature (typical) | 30–60°C86–140°F |
| ρDensity (typical) | 1.21 g/cm³0.0437 lb/in³ |
| Enclosure | Not needed |
| Length per kg | 344 m1129 ft |
| Length per kg at 2.85 mm | 130 m427 ft |
TPU 95A (Shore hardness 95A) is the most common flexible filament. Print slowly (around 20–40 mm/s) with a direct-drive extruder and little retraction. TPU's glass transition is well below room temperature, so a Tg value is not meaningful for printed parts.
Also known as
TPUTPE
All filaments
Sources
- Prusa Knowledge Base: Material guide (PLA, PETG, ASA, PC, Polyamide pages)
- Prusament technical data sheets (diameter tolerance ±0.02 mm, densities)
- Ultimaker: material technical data sheets (2.85 mm filaments)
- Simplify3D: Filament properties table
- Victrex: PEEK 450G datasheet (Tg 143 °C, density 1.30 g/cm³)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.