Nylon PA6 Filament: Temperatures, Density and Length per kg

3D Printer Filament · Materials · length per kg at 1.75 mm

Nylon PA6 filament. Typical settings and properties are listed below, with the length of a 1 kg spool computed from the density. Always start from the temperatures printed on your spool.

Nozzle temperature (typical)
250–280°C482–536°F482–536°F250–280°C
Bed temperature (typical)
70–100°C158–212°F158–212°F70–100°C
ρDensity (typical)
1.14 g/cm³0.0412 lb/in³0.0412 lb/in³1.14 g/cm³
Length per kg
365 m1198 ft1198 ft365 m

Drawing

050100150200250300350°Cbed70–100°C158–212°Fnozzle250–280°C482–536°F
Typical bed and nozzle ranges with glass transition (Tg), °C.Proportions shown, not to scale

Nylon PA6 specifications

Nozzle temperature (typical)250–280°C482–536°F
Bed temperature (typical)70–100°C158–212°F
ρDensity (typical)1.14 g/cm³0.0412 lb/in³
EnclosureRequired (warping, fumes)
Length per kg365 m1198 ft
Length per kg at 2.85 mm138 m453 ft

PA6 nylon is tough, slightly flexible and wear-resistant, but absorbs moisture within hours. Dry it before printing and print from a dry box. Adhesion: garolite (G10) or a PEI sheet with glue. The glass transition depends strongly on moisture content, so we do not list a single Tg.

Also known as

PA

All filaments

Compare all 16 diameters and materials →

Sources

  1. Prusa Knowledge Base: Material guide (PLA, PETG, ASA, PC, Polyamide pages)
  2. Prusament technical data sheets (diameter tolerance ±0.02 mm, densities)
  3. Ultimaker: material technical data sheets (2.85 mm filaments)
  4. Simplify3D: Filament properties table
  5. Victrex: PEEK 450G datasheet (Tg 143 °C, density 1.30 g/cm³)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.