Module 0.5 Gear Dimensions
Gear Modules · Fine modules below 1 (DIN 780 / JIS B 1701)
A Module 0.5 gear has a circular pitch of 1.571 mm (0.0618 in) and a whole tooth depth of 1.125 mm (0.0443 in), addendum 0.5 mm (0.0197 in), dedendum 0.625 mm (0.0246 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 0.5 mm. The equivalent diametral pitch is 50.8. The nearest inch gear, 48 DP, does not mesh with it.
- mModule
- 0.5 mm0.0197 in0.0197 in0.5 mm
- pCircular pitch (πm)
- 1.571 mm0.0618 in0.0618 in1.571 mm
- hWhole depth (2.25 m)
- 1.125 mm0.0443 in0.0443 in1.125 mm
- DPEquivalent diametral pitch (25.4/m)
- 50.8
Drawing
Module 0.5 specifications
| mModule | 0.5 mm0.0197 in |
|---|---|
| Series | fine |
| pCircular pitch (πm) | 1.571 mm0.0618 in |
| sTooth thickness (πm/2) | 0.785 mm0.0309 in |
| haAddendum (1 m) | 0.5 mm0.0197 in |
| hfDedendum (1.25 m) | 0.625 mm0.0246 in |
| hWhole depth (2.25 m) | 1.125 mm0.0443 in |
| cBottom clearance (0.25 m) | 0.125 mm0.0049 in |
| DPEquivalent diametral pitch (25.4/m) | 50.8 |
| Nearest standard DP | 48 |
Module 0.5 is the most common size for small plastic and brass gears in toys, printers, servos and RC models. Many hobby gears are labelled “0.5M” or “M0.5”.
Also known as
All gear modules
Sources
- ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
- ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
- DIN 780-1: Series of modules for gears (modules below 1 mm)
- KHK Gear Technical Reference: Module sizes and tooth profile
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.