Module 0.6 Gear Dimensions

Gear Modules · Fine modules below 1 (DIN 780 / JIS B 1701)

A Module 0.6 gear has a circular pitch of 1.885 mm (0.0742 in) and a whole tooth depth of 1.35 mm (0.0531 in), addendum 0.6 mm (0.0236 in), dedendum 0.75 mm (0.0295 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 0.6 mm. The equivalent diametral pitch is 42.33. The nearest inch gear, 40 DP, does not mesh with it.

mModule
0.6 mm0.0236 in0.0236 in0.6 mm
pCircular pitch (πm)
1.885 mm0.0742 in0.0742 in1.885 mm
hWhole depth (2.25 m)
1.35 mm0.0531 in0.0531 in1.35 mm
DPEquivalent diametral pitch (25.4/m)
42.33

Drawing

Pitch linep 1.885 mmp 0.0742 ins 0.943 mms 0.0371 inh 1.35 mmh 0.0531 inha 0.6 mmha 0.0236 inhf 0.75 mmhf 0.0295 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 0.6 specifications

mModule0.6 mm0.0236 in
Seriesfine
pCircular pitch (πm)1.885 mm0.0742 in
sTooth thickness (πm/2)0.943 mm0.0371 in
haAddendum (1 m)0.6 mm0.0236 in
hfDedendum (1.25 m)0.75 mm0.0295 in
hWhole depth (2.25 m)1.35 mm0.0531 in
cBottom clearance (0.25 m)0.15 mm0.0059 in
DPEquivalent diametral pitch (25.4/m)42.33
Nearest standard DP40

Also known as

M0.6MOD0.6

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.