Module 0.7 Gear Dimensions

Gear Modules · Fine modules below 1 (DIN 780 / JIS B 1701)

A Module 0.7 gear has a circular pitch of 2.199 mm (0.0866 in) and a whole tooth depth of 1.575 mm (0.0620 in), addendum 0.7 mm (0.0276 in), dedendum 0.875 mm (0.0344 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 0.7 mm. The equivalent diametral pitch is 36.29. The nearest inch gear, 40 DP, does not mesh with it.

mModule
0.7 mm0.0276 in0.0276 in0.7 mm
pCircular pitch (πm)
2.199 mm0.0866 in0.0866 in2.199 mm
hWhole depth (2.25 m)
1.575 mm0.0620 in0.0620 in1.575 mm
DPEquivalent diametral pitch (25.4/m)
36.29

Drawing

Pitch linep 2.199 mmp 0.0866 ins 1.100 mms 0.0433 inh 1.575 mmh 0.0620 inha 0.7 mmha 0.0276 inhf 0.875 mmhf 0.0344 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 0.7 specifications

mModule0.7 mm0.0276 in
Seriesfine
pCircular pitch (πm)2.199 mm0.0866 in
sTooth thickness (πm/2)1.100 mm0.0433 in
haAddendum (1 m)0.7 mm0.0276 in
hfDedendum (1.25 m)0.875 mm0.0344 in
hWhole depth (2.25 m)1.575 mm0.0620 in
cBottom clearance (0.25 m)0.175 mm0.0069 in
DPEquivalent diametral pitch (25.4/m)36.29
Nearest standard DP40

Also known as

M0.7MOD0.7

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.