Module 0.75 Gear Dimensions

Gear Modules · Fine modules below 1 (DIN 780 / JIS B 1701)

A Module 0.75 gear has a circular pitch of 2.356 mm (0.0928 in) and a whole tooth depth of 1.6875 mm (0.0664 in), addendum 0.75 mm (0.0295 in), dedendum 0.9375 mm (0.0369 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 0.75 mm. The equivalent diametral pitch is 33.87. The nearest inch gear, 32 DP, does not mesh with it.

mModule
0.75 mm0.0295 in0.0295 in0.75 mm
pCircular pitch (πm)
2.356 mm0.0928 in0.0928 in2.356 mm
hWhole depth (2.25 m)
1.6875 mm0.0664 in0.0664 in1.6875 mm
DPEquivalent diametral pitch (25.4/m)
33.87

Drawing

Pitch linep 2.356 mmp 0.0928 ins 1.178 mms 0.0464 inh 1.6875 mmh 0.0664 inha 0.75 mmha 0.0295 inhf 0.9375 mmhf 0.0369 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 0.75 specifications

mModule0.75 mm0.0295 in
Seriesfine
pCircular pitch (πm)2.356 mm0.0928 in
sTooth thickness (πm/2)1.178 mm0.0464 in
haAddendum (1 m)0.75 mm0.0295 in
hfDedendum (1.25 m)0.9375 mm0.0369 in
hWhole depth (2.25 m)1.6875 mm0.0664 in
cBottom clearance (0.25 m)0.1875 mm0.0074 in
DPEquivalent diametral pitch (25.4/m)33.87
Nearest standard DP32

Also known as

M0.75MOD0.75

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.