Module 1.5 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 1.5 gear has a circular pitch of 4.712 mm (0.1855 in) and a whole tooth depth of 3.375 mm (0.1329 in), addendum 1.5 mm (0.0591 in), dedendum 1.875 mm (0.0738 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 1.5 mm. The equivalent diametral pitch is 16.93. The nearest inch gear, 16 DP, does not mesh with it.

mModule
1.5 mm0.0591 in0.0591 in1.5 mm
pCircular pitch (πm)
4.712 mm0.1855 in0.1855 in4.712 mm
hWhole depth (2.25 m)
3.375 mm0.1329 in0.1329 in3.375 mm
DPEquivalent diametral pitch (25.4/m)
16.93

Drawing

Pitch linep 4.712 mmp 0.1855 ins 2.356 mms 0.0928 inh 3.375 mmh 0.1329 inha 1.5 mmha 0.0591 inhf 1.875 mmhf 0.0738 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 1.5 specifications

mModule1.5 mm0.0591 in
SeriesI
pCircular pitch (πm)4.712 mm0.1855 in
sTooth thickness (πm/2)2.356 mm0.0928 in
haAddendum (1 m)1.5 mm0.0591 in
hfDedendum (1.25 m)1.875 mm0.0738 in
hWhole depth (2.25 m)3.375 mm0.1329 in
cBottom clearance (0.25 m)0.375 mm0.0148 in
DPEquivalent diametral pitch (25.4/m)16.93
Nearest standard DP16

Module 1.5 is frequent in small industrial gearboxes and gear racks; its equivalent DP is 16.93, close to 16 and 18 DP.

Also known as

M1.5MOD1.5

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.