Module 10 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 10 gear has a circular pitch of 31.416 mm (1.2368 in) and a whole tooth depth of 22.5 mm (0.8858 in), addendum 10 mm (0.3937 in), dedendum 12.5 mm (0.4921 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 10 mm. The equivalent diametral pitch is 2.54. The nearest inch gear, 2.5 DP, does not mesh with it.

mModule
10 mm0.3937 in0.3937 in10 mm
pCircular pitch (πm)
31.416 mm1.2368 in1.2368 in31.416 mm
hWhole depth (2.25 m)
22.5 mm0.8858 in0.8858 in22.5 mm
DPEquivalent diametral pitch (25.4/m)
2.54

Drawing

Pitch linep 31.416 mmp 1.2368 ins 15.708 mms 0.6184 inh 22.5 mmh 0.8858 inha 10 mmha 0.3937 inhf 12.5 mmhf 0.4921 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 10 specifications

mModule10 mm0.3937 in
SeriesI
pCircular pitch (πm)31.416 mm1.2368 in
sTooth thickness (πm/2)15.708 mm0.6184 in
haAddendum (1 m)10 mm0.3937 in
hfDedendum (1.25 m)12.5 mm0.4921 in
hWhole depth (2.25 m)22.5 mm0.8858 in
cBottom clearance (0.25 m)2.5 mm0.0984 in
DPEquivalent diametral pitch (25.4/m)2.54
Nearest standard DP2.5

Also known as

M10MOD10

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.