Module 9 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 9 gear has a circular pitch of 28.274 mm (1.1132 in) and a whole tooth depth of 20.25 mm (0.7972 in), addendum 9 mm (0.3543 in), dedendum 11.25 mm (0.4429 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 9 mm. The equivalent diametral pitch is 2.82. The nearest inch gear, 3 DP, does not mesh with it.

mModule
9 mm0.3543 in0.3543 in9 mm
pCircular pitch (πm)
28.274 mm1.1132 in1.1132 in28.274 mm
hWhole depth (2.25 m)
20.25 mm0.7972 in0.7972 in20.25 mm
DPEquivalent diametral pitch (25.4/m)
2.82

Drawing

Pitch linep 28.274 mmp 1.1132 ins 14.137 mms 0.5566 inh 20.25 mmh 0.7972 inha 9 mmha 0.3543 inhf 11.25 mmhf 0.4429 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 9 specifications

mModule9 mm0.3543 in
SeriesII
pCircular pitch (πm)28.274 mm1.1132 in
sTooth thickness (πm/2)14.137 mm0.5566 in
haAddendum (1 m)9 mm0.3543 in
hfDedendum (1.25 m)11.25 mm0.4429 in
hWhole depth (2.25 m)20.25 mm0.7972 in
cBottom clearance (0.25 m)2.25 mm0.0886 in
DPEquivalent diametral pitch (25.4/m)2.82
Nearest standard DP3

Also known as

M9MOD9

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.