Module 11 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 11 gear has a circular pitch of 34.558 mm (1.3605 in) and a whole tooth depth of 24.75 mm (0.9744 in), addendum 11 mm (0.4331 in), dedendum 13.75 mm (0.5413 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 11 mm. The equivalent diametral pitch is 2.31. The nearest inch gear, 2.5 DP, does not mesh with it.

mModule
11 mm0.4331 in0.4331 in11 mm
pCircular pitch (πm)
34.558 mm1.3605 in1.3605 in34.558 mm
hWhole depth (2.25 m)
24.75 mm0.9744 in0.9744 in24.75 mm
DPEquivalent diametral pitch (25.4/m)
2.31

Drawing

Pitch linep 34.558 mmp 1.3605 ins 17.279 mms 0.6803 inh 24.75 mmh 0.9744 inha 11 mmha 0.4331 inhf 13.75 mmhf 0.5413 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 11 specifications

mModule11 mm0.4331 in
SeriesII
pCircular pitch (πm)34.558 mm1.3605 in
sTooth thickness (πm/2)17.279 mm0.6803 in
haAddendum (1 m)11 mm0.4331 in
hfDedendum (1.25 m)13.75 mm0.5413 in
hWhole depth (2.25 m)24.75 mm0.9744 in
cBottom clearance (0.25 m)2.75 mm0.1083 in
DPEquivalent diametral pitch (25.4/m)2.31
Nearest standard DP2.5

Also known as

M11MOD11

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.