Module 12 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 12 gear has a circular pitch of 37.699 mm (1.4842 in) and a whole tooth depth of 27 mm (1.0630 in), addendum 12 mm (0.4724 in), dedendum 15 mm (0.5906 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 12 mm. The equivalent diametral pitch is 2.12. The nearest inch gear, 2 DP, does not mesh with it.

mModule
12 mm0.4724 in0.4724 in12 mm
pCircular pitch (πm)
37.699 mm1.4842 in1.4842 in37.699 mm
hWhole depth (2.25 m)
27 mm1.0630 in1.0630 in27 mm
DPEquivalent diametral pitch (25.4/m)
2.12

Drawing

Pitch linep 37.699 mmp 1.4842 ins 18.850 mms 0.7421 inh 27 mmh 1.0630 inha 12 mmha 0.4724 inhf 15 mmhf 0.5906 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 12 specifications

mModule12 mm0.4724 in
SeriesI
pCircular pitch (πm)37.699 mm1.4842 in
sTooth thickness (πm/2)18.850 mm0.7421 in
haAddendum (1 m)12 mm0.4724 in
hfDedendum (1.25 m)15 mm0.5906 in
hWhole depth (2.25 m)27 mm1.0630 in
cBottom clearance (0.25 m)3 mm0.1181 in
DPEquivalent diametral pitch (25.4/m)2.12
Nearest standard DP2

Also known as

M12MOD12

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.