Module 14 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 14 gear has a circular pitch of 43.982 mm (1.7316 in) and a whole tooth depth of 31.5 mm (1.2402 in), addendum 14 mm (0.5512 in), dedendum 17.5 mm (0.6890 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 14 mm. The equivalent diametral pitch is 1.81. The nearest inch gear, 1.75 DP, does not mesh with it.

mModule
14 mm0.5512 in0.5512 in14 mm
pCircular pitch (πm)
43.982 mm1.7316 in1.7316 in43.982 mm
hWhole depth (2.25 m)
31.5 mm1.2402 in1.2402 in31.5 mm
DPEquivalent diametral pitch (25.4/m)
1.81

Drawing

Pitch linep 43.982 mmp 1.7316 ins 21.991 mms 0.8658 inh 31.5 mmh 1.2402 inha 14 mmha 0.5512 inhf 17.5 mmhf 0.6890 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 14 specifications

mModule14 mm0.5512 in
SeriesII
pCircular pitch (πm)43.982 mm1.7316 in
sTooth thickness (πm/2)21.991 mm0.8658 in
haAddendum (1 m)14 mm0.5512 in
hfDedendum (1.25 m)17.5 mm0.6890 in
hWhole depth (2.25 m)31.5 mm1.2402 in
cBottom clearance (0.25 m)3.5 mm0.1378 in
DPEquivalent diametral pitch (25.4/m)1.81
Nearest standard DP1.75

Also known as

M14MOD14

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.