Module 16 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 16 gear has a circular pitch of 50.266 mm (1.9790 in) and a whole tooth depth of 36 mm (1.4173 in), addendum 16 mm (0.6299 in), dedendum 20 mm (0.7874 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 16 mm. The equivalent diametral pitch is 1.59. The nearest inch gear, 1.5 DP, does not mesh with it.

mModule
16 mm0.6299 in0.6299 in16 mm
pCircular pitch (πm)
50.266 mm1.9790 in1.9790 in50.266 mm
hWhole depth (2.25 m)
36 mm1.4173 in1.4173 in36 mm
DPEquivalent diametral pitch (25.4/m)
1.59

Drawing

Pitch linep 50.266 mmp 1.9790 ins 25.133 mms 0.9895 inh 36 mmh 1.4173 inha 16 mmha 0.6299 inhf 20 mmhf 0.7874 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 16 specifications

mModule16 mm0.6299 in
SeriesI
pCircular pitch (πm)50.266 mm1.9790 in
sTooth thickness (πm/2)25.133 mm0.9895 in
haAddendum (1 m)16 mm0.6299 in
hfDedendum (1.25 m)20 mm0.7874 in
hWhole depth (2.25 m)36 mm1.4173 in
cBottom clearance (0.25 m)4 mm0.1575 in
DPEquivalent diametral pitch (25.4/m)1.59
Nearest standard DP1.5

Also known as

M16MOD16

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.