Module 18 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 18 gear has a circular pitch of 56.549 mm (2.2263 in) and a whole tooth depth of 40.5 mm (1.5945 in), addendum 18 mm (0.7087 in), dedendum 22.5 mm (0.8858 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 18 mm. The equivalent diametral pitch is 1.41. The nearest inch gear, 1.5 DP, does not mesh with it.

mModule
18 mm0.7087 in0.7087 in18 mm
pCircular pitch (πm)
56.549 mm2.2263 in2.2263 in56.549 mm
hWhole depth (2.25 m)
40.5 mm1.5945 in1.5945 in40.5 mm
DPEquivalent diametral pitch (25.4/m)
1.41

Drawing

Pitch linep 56.549 mmp 2.2263 ins 28.274 mms 1.1132 inh 40.5 mmh 1.5945 inha 18 mmha 0.7087 inhf 22.5 mmhf 0.8858 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 18 specifications

mModule18 mm0.7087 in
SeriesII
pCircular pitch (πm)56.549 mm2.2263 in
sTooth thickness (πm/2)28.274 mm1.1132 in
haAddendum (1 m)18 mm0.7087 in
hfDedendum (1.25 m)22.5 mm0.8858 in
hWhole depth (2.25 m)40.5 mm1.5945 in
cBottom clearance (0.25 m)4.5 mm0.1772 in
DPEquivalent diametral pitch (25.4/m)1.41
Nearest standard DP1.5

Also known as

M18MOD18

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.