Module 20 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 20 gear has a circular pitch of 62.832 mm (2.4737 in) and a whole tooth depth of 45 mm (1.7717 in), addendum 20 mm (0.7874 in), dedendum 25 mm (0.9843 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 20 mm. The equivalent diametral pitch is 1.27. The nearest inch gear, 1.25 DP, does not mesh with it.

mModule
20 mm0.7874 in0.7874 in20 mm
pCircular pitch (πm)
62.832 mm2.4737 in2.4737 in62.832 mm
hWhole depth (2.25 m)
45 mm1.7717 in1.7717 in45 mm
DPEquivalent diametral pitch (25.4/m)
1.27

Drawing

Pitch linep 62.832 mmp 2.4737 ins 31.416 mms 1.2368 inh 45 mmh 1.7717 inha 20 mmha 0.7874 inhf 25 mmhf 0.9843 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 20 specifications

mModule20 mm0.7874 in
SeriesI
pCircular pitch (πm)62.832 mm2.4737 in
sTooth thickness (πm/2)31.416 mm1.2368 in
haAddendum (1 m)20 mm0.7874 in
hfDedendum (1.25 m)25 mm0.9843 in
hWhole depth (2.25 m)45 mm1.7717 in
cBottom clearance (0.25 m)5 mm0.1969 in
DPEquivalent diametral pitch (25.4/m)1.27
Nearest standard DP1.25

Also known as

M20MOD20

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.