Module 2.75 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 2.75 gear has a circular pitch of 8.639 mm (0.3401 in) and a whole tooth depth of 6.1875 mm (0.2436 in), addendum 2.75 mm (0.1083 in), dedendum 3.4375 mm (0.1353 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 2.75 mm. The equivalent diametral pitch is 9.24. The nearest inch gear, 10 DP, does not mesh with it.

mModule
2.75 mm0.1083 in0.1083 in2.75 mm
pCircular pitch (πm)
8.639 mm0.3401 in0.3401 in8.639 mm
hWhole depth (2.25 m)
6.1875 mm0.2436 in0.2436 in6.1875 mm
DPEquivalent diametral pitch (25.4/m)
9.24

Drawing

Pitch linep 8.639 mmp 0.3401 ins 4.320 mms 0.1701 inh 6.1875 mmh 0.2436 inha 2.75 mmha 0.1083 inhf 3.4375 mmhf 0.1353 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 2.75 specifications

mModule2.75 mm0.1083 in
SeriesII
pCircular pitch (πm)8.639 mm0.3401 in
sTooth thickness (πm/2)4.320 mm0.1701 in
haAddendum (1 m)2.75 mm0.1083 in
hfDedendum (1.25 m)3.4375 mm0.1353 in
hWhole depth (2.25 m)6.1875 mm0.2436 in
cBottom clearance (0.25 m)0.6875 mm0.0271 in
DPEquivalent diametral pitch (25.4/m)9.24
Nearest standard DP10

Also known as

M2.75MOD2.75

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.