Module 3 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 3 gear has a circular pitch of 9.425 mm (0.3711 in) and a whole tooth depth of 6.75 mm (0.2657 in), addendum 3 mm (0.1181 in), dedendum 3.75 mm (0.1476 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 3 mm. The equivalent diametral pitch is 8.47. The nearest inch gear, 8 DP, does not mesh with it.

mModule
3 mm0.1181 in0.1181 in3 mm
pCircular pitch (πm)
9.425 mm0.3711 in0.3711 in9.425 mm
hWhole depth (2.25 m)
6.75 mm0.2657 in0.2657 in6.75 mm
DPEquivalent diametral pitch (25.4/m)
8.47

Drawing

Pitch linep 9.425 mmp 0.3711 ins 4.712 mms 0.1855 inh 6.75 mmh 0.2657 inha 3 mmha 0.1181 inhf 3.75 mmhf 0.1476 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 3 specifications

mModule3 mm0.1181 in
SeriesI
pCircular pitch (πm)9.425 mm0.3711 in
sTooth thickness (πm/2)4.712 mm0.1855 in
haAddendum (1 m)3 mm0.1181 in
hfDedendum (1.25 m)3.75 mm0.1476 in
hWhole depth (2.25 m)6.75 mm0.2657 in
cBottom clearance (0.25 m)0.75 mm0.0295 in
DPEquivalent diametral pitch (25.4/m)8.47
Nearest standard DP8

Module 3: circular pitch 9.425 mm, whole depth 6.75 mm. Close to 8 DP (3.175 mm module) but not interchangeable.

Also known as

M3MOD3

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.